Do a test print on a rag shirt first if possible.
Back t shirt design placement guide.
Popular placements are as show above or on the left or right side of the sleeve.
Always thread the t shirt and make sure the collar is off the heat press.
Back designs should be placed using the center crease and four inches down from the center of the neckline.
1 to 3 wide by 6 to 8 tall.
Saved by hope medlin.
The ultimate guide to design size placement jackets left chest 3 5 to 4 from center s edge and 6 to 8 from the seam of the left shoulder.
Ladies tank tops are usually a 1 total drop.
To learn more about design sizing and placement download our free e book.
If your design is a regular full front size the standard placement for that will start at 4 from the bottom of the collar and the design will extend as far down as it goes to the edge of the maximum print area.
Back prints are generally 1 lower drop than front prints.
Tips centered design placement adult.
Left chest without pocket on t shirt.
Having the extra bulge from the collar seams can result in uneven pressure.
3 3 5 down from the collar youth.
Vinyle cricut cricut vinyl inkscape tutorials cricut tutorials silhouette cameo projects silhouette design silhouette vinyl tips tricks silhouette machine.
Here is a placement guide as well as some tips.
Ladies tees are usually 1 higher drop.
Designs placed on the back of shirts should be approximately 5 from the collar and centered between the left and right seams.
Vinyl placement guide for shirts.
This means if your design is justified to be flush to the top of the 14 16 template the design will start 2 inches down.
Those of you who love the comfort and convenience of hoodies can modify the size up to 12x16 inches.
There are several very useful websites out there with even more specific shirt decal placement tips.
2 down from the collar centered design size adult.
75 to 2 wide by 6 to 8 tall.
In terms of neckline design placement you need to keep 3 to 3 5 inches below that line for standard t shirts and 1 5 inches for the v neck ones.
2 3 down from the collar toddler.
If your design is a small center chest that changes things a bit.
Unlike a pant let placement your alignment will be perpendicular with the sleeve of the shirt.
Design placement on a garment when placing your design in the template keep in mind there is a default 1 2 inch standard offset from the neck during the printing process.
When printing hooded sweatshirts the back print should be dropped an additional couple of inches so the print is visible and not covered by the hood of the sweatshirt.